manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 181

181

3-5. Opening and closing the windows

3

Op
eration

 o

f each

 compo

nen

t

HIGHLANDER_HV_U (OM48F02U)

■

When the power window does not close normally (windows with one-
touch closing function only)

If the jam protection function is operating abnormally and a window cannot be
closed, perform the following operations using the power window switch on
the relevant door.

●

After stopping the vehicle, the window can be closed by holding the power
window switch in the one-touch closing position while the power switch is
turned to ON mode.

●

If the window still cannot be closed even by carrying out the operation
explained above, initialize the function by performing the following proce-
dure.

Hold the power window switch in the one-touch closing position. Continue
holding the switch for a further 6 seconds after the window has closed.

Hold the power window switch in the one-touch opening position. Con-
tinue holding the switch for a further 2 seconds after the window has
opened completely.

Hold the power window switch in the one-touch closing position once
again. Continue holding the switch for a further 2 seconds after the win-
dow has closed.

If you release the switch while the window is moving, start again from the
beginning. 
If the window continues to close but then re-open slightly even after perform-
ing the above procedure correctly, have the vehicle inspected by your Toyota
dealer. 

■

Door lock linked window operation (windows with one-touch closing
function only)

●

The power windows can be opened and closed using the mechanical key.

*

 

(

P. 513)

●

The power windows can be opened using the wireless remote control.

*

(

P. 129)

*

: These settings must be customized at your Toyota dealer.

■

Customization

Settings (e.g. linked door lock operation) can be changed. 
(Customizable features: 

P. 556)

1

2

3

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands