manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 412

412

6-3. Do-it-yourself maintenance

HIGHLANDER_HV_U (OM48F02U)

New tread

Treadwear indicator

Worn tread

The location of treadwear indica-
tors is shown by the “TWI” or “

”

marks, etc., molded on the side-
wall of each tire.

Check spare tire condition and
pressure if not rotated.

Rotate the tires in the order shown.

Do not fail to initialize the tire pressure warning system after tire rota-
tion.
To equalize tire wear and extend tire life, Toyota recommends that tire
rotation is carried out at the same interval as tire inspection.

Tires

Replace or rotate tires in accordance with maintenance sched-
ules and treadwear.

Checking tires

1
2
3

Tire rotation

Vehicles with compact spare
tire

Vehicles with full-size spare
tire

Front

Front

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands