Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 483

Page: 483 / 604

483

7-2. Steps to take in an emergency

en tro

uble

ris

HIGHLANDER_HV_U (OM48F02U)

Once



• When the doors were

unlocked with the mechanical
key and then the power
switch was pressed, the elec-
tronic key could not be
detected in the vehicle.

• The electronic key could not

be detected in the vehicle
even after the power switch
was pressed two consecu-
tive times.



Touch the electronic key to
the power switch while
depressing the brake
pedal.

Once





Monochrome display



Color display

During a hybrid system starting
procedure in the event that the
electronic key was not function-
ing properly (



P. 513), the

power switch was touched with
the electronic key.



Press the power switch
within 10 seconds of the
buzzer sounding.





Monochrome display



Color display

Indicates that:
• With the power switch off, the

doors were unlocked and
then the driver’s door was
opened and closed;

• The power switch was turned

to ACCESSORY mode with-
out starting the hybrid sys-
tem; or

• The shift lever was shifted to

P from another position with
the power switch in ON
mode.



Press the power switch
while depressing the brake
pedal.

Interior

buzzer

Exterior

buzzer

Warning message

Details/Actions

(Flashes)

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands

Toyota Highlander Hybrid 2015, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands