manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 162

162

3-3. Adjusting the seats

HIGHLANDER_HV_U (OM48F02U)

■

Returning the second seats

Lift up the seatbacks until they
lock.

■

Before folding down the third seats

Stow the third seat belt buck-
les.

Pass the outer seat belts
through the seat belt hangers
and secure the seat belt
plates.

This prevents the shoulder belts
from being damaged.

Make sure that the seat belts
are removed from the hangers
before using them.

Lower the head restraints to the lowest position. (

P. 169)

Folding down the third seats

1

2

3

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands