Toyota Celica 2005, Repair Manual

Page: 954 / 2497

D07811
3 4
− DIAGNOSTICS AUTOMATIC TRANSAXLE (U240E)
DI − 753
2005 CELICA (RM1131U)
INSPECTION PROCEDURE
”M” position indicator light flashes.
When the ATF temperature is too high or low, the M position indicator light flashes. If this happens, shift the
shift lever to the D position and shift it back to the M position after the ATF temperature increase or decrease.
If the M position indicator light is still flashing, check if DTC P0710, P0712, or P0713 is displayed or not and
inspect the transmission shift main switch circuit.
”M” position indicator light does not light up.
1 Check E − shift main switch.
PREPARATION:
Remove the E − shift main switch.
CHECK:
Check continuity between each terminal of the E − shift main
switch.
OK:
Shift Lever Position Tester connection Specified value
M 3 − 4 Continuity
Except M 3 − 4 No continuity
NG Replace the E − shift main switch
(See page AX − 17).
OK
2 Check and replace the combination meter (See page BE − 50).
NG Replace the combination meter.
OK
953