Toyota Celica 2005, Repair Manual

Page: 2330 / 2497

H12562
H12563
Clip
H12564
H12565
B
A
BO − 24
− BODY BACK DOOR
2005 CELICA (RM1131U)
6. REMOVE CONTROL CABLE
(a) Disconnect the cable from the back door lock.
(b) Disconnect the cable from the outside back door handle.
(c) Remove the clamp and control cable.
7. REMOVE BACK DOOR LOCK
(a) Remove the wire harness clamp from the door lock.
(b) Remove the 3 bolts and back door lock.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
(c) Disconnect the connector.
8. REMOVE KEY CYLINDER
(a) Disconnect the control link.
(b) Remove the 2 nuts and key cylinder.
9. REMOVE OUTSIDE BACK DOOR HANDLE
(a) w/ Power door lock:
Disconnect the connector.
(b) Remove the 2 nuts and outside back door handle.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
(c) Remove the control link from the outside back door han-
dle.
10. REMOVE OUTSIDE BACK DOOR GARNISH
(a) Remove the nut.
(b) Remove the outside back door garnish by compressing
clip from the inside to disengage them.
11. REMOVE LICENSE PLATE LIGHTS
(a) Disconnect the connectors.
(b) Using a screwdriver, remove the license plate lights.
HINT:
Tape the screwdriver tip before use.
12. REMOVE CENTER STOP LIGHT
(a) Remove the 2 nuts.
(b) Disconnect the connector and washer hose, then remove
the center stop light in order A, B as shown in the illustra-
tion..
13. REMOVE BACK DOOR WEATHERSTRIP
2329