Toyota Celica 2005, Repair Manual

Page: 2355 / 2497

H10406
BO5232
BO1689
Plastic Sheet
Protective Tape
− BODY WINDSHIELD
BO − 49
2005 CELICA (RM1131U)
12. REMOVE WINDSHIELD OUTSIDE MOULDING
(a) Using a knife, cut off the moulding as shown in the illustra-
tion.
NOTICE:
Do not damage the body with the knife.
(b) Remove the remaining moulding.
13. REMOVE WINDSHIELD GLASS
(a) Insert a piano wire between body and glass and let it pass
through.
(b) Tie both wire ends to wooden blocks or similar objects.
(c) w/ Front window defogger:
Disconnect the connector.
NOTICE:
Be careful not to damage the wire harness.
(d) Cut the adhesive by pulling the piano wire around it.
NOTICE:
When separating the glass, take care not to damage the
paint and exterior ornaments. To prevent the safety pad
from being scratched when removing the windshield,
place a plastic sheet between the piano wire and safety
pad.
HINT:
Apply protective tape to the outer surface to keep the surface
from being scratched.
(e)
Remove the glass.
NOTICE:
Leave the adhesive on the body as much as possible when
cutting off the glass.
2354