Toyota Celica 2005, Repair Manual

Page: 2420 / 2497

H12648
H12649
SST
Battery
SST
R13455
10 m (33 ft) or more
BO − 114
− BODY SEAT BELT PRETENSIONER
2005 CELICA (RM1131U)
(12) Disconnect the pretensioner connector as shown in
the illustration.
(c) Install the SST.
(1)
Buckle the front seat belt and check that there is no
looseness and slack in the front seat inner belt and
front seat outer belt.
(2) Connect the 2 SST, then connect them to the seat
belt pretensioner.
SST 09082 − 00700, 09082 − 00740
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(3) Move the SST to at least 10 m (33 ft) away from the
front of the vehicle.
(4) Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(5) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the negative (
− ) termi-
nal.
(d) Activate the seat belt pretensioner.
(1)
Confirm that no one is inside the vehicle or within 10
m (33 ft) area around of the vehicle.
(2) Press the SST activation switch and activate the
seat belt pretensioner.
HINT:
The seat belt pretensioner operates simultaneously as the LED
of the SST activation switch lights up.
(e)
Dispose of front seat outer belt (with seat belt pretension-
er).
CAUTION:
S
The front seat outer belt is very hot when the seat belt
pretensioner is activated, so leave it alone for at least
30 minutes after activation.
S
Use gloves and safety glasses when handling a front
seat outer belt with activated seat belt pretensioner.
S
Always wash your hands with water after completing
the operation.
S
Do not apply water, etc. to a front seat outer belt with
activated seat belt pretensioner.
2419