D-4
4.1.2 How to set extended parameters
The VF-A7 inverter has extended parameters to allow you to make full use of its functions.
The code of every extended parameter is composed up of an
and a 3-digit number.
[Procedure for setting an extended parameter]
You can return to the previous step by pressing the key
instead of the key.
Extended parameter
ENT
Press the Monitor key once, then press
the
▲
or
▼
key to select a parameter
(
〜
) from among the basic
parameters.
Select the parameter you want to
change by pressing
▲
and
▼
key, then press the Enter key to
display the parameter setting.
MON
MON
▲ ▼
ENT
▲ ▼
ENT
▲ ▼
ENT
：
Press the Monitor key to switch to parameter setting
mode. (
is displayed.)
：
Select the parameter (
〜
) the code of which
is the closest to that of the parameter you want to change.
：
Press the Enter key to activate the selected parameter.
：
Select the parameter you want to change .
：
Press the Enter key to display the extended parameter
setting (value) you want to change.
：
Change the extended parameter setting (set value).
：
Press the Enter key to save the change.
MON
ENT
〜
〜
〜
〜
〜
〜
〜
〜
〜
