F-10
S1(V/f switching #1)
-CC
S2(V/f switching #2)
-CC
V/f
Parameters selected
OFF
OFF
#1
Base frequency #1
：
Base frequency voltage #1
：
Manual torque boost
：
Motor overload protection level #1
：
Acceleration time #1
：
Deceleration time #1
：
Acceleration/deceleration pattern #1
：
Power running torque limit #1
：
Regenerative torque limit #1
：
ON
OFF
#2
Base frequency #2
：
Base frequency voltage #2
：
Manual torque boost #2
：
Motor overload protection level #2
：
Acceleration time #2
：
Deceleration time #2
：
Acceleration/deceleration pattern #2
：
Power running torque limit #2
：
Regenerative torque limit #2
：
OFF
ON
#3
Base frequency #3
：
Base frequency voltage #3
：
Manual torque boost #3
：
Motor overload protection level #3
：
Acceleration time #3
：
Deceleration time #3
：
Acceleration/deceleration pattern #3
：
Power running torque limit #3
：
Regenerative torque limit #3
：
ON
ON
#4
Base frequency #4
：
Base frequency voltage #4
：
Manual torque boost #4
：
Motor overload protection level #4
：
Acceleration time #4
：
Deceleration time #4
：
Acceleration/deceleration pattern #4
：
Power running torque limit #4
：
Regenerative torque limit #4
：
☆
Select V/f #1 when using the sensor-less vector control and the V/f 5-point setting.
Selecting V/f #2, #3 or #4 disables the vector control but enables the V/f constant control.
In addition, if the torque limit switching function and the acceleration/deceleration
switching function are assigned to input terminals, their settings are valid.
Note) With the control panel or communication, the following parameters can be set individually:
･
V/f switching (
)
･
Acceleration/deceleration switching(
)
･
Torque limit switching(
)
＊
These functions are active only in control panel operation mode.
6.5
V/f 5-point setting
：
V/f 5-point setting VF1 frequency
：
V/f 5-point setting VF4 frequency
：
V/f 5-point setting VF1 voltage
：
V/f 5-point setting VF4 voltage
：
V/f 5-point setting VF2 frequency
：
V/f 5-point setting VF5 frequency
：
V/f 5-point setting VF2 voltage
：
V/f 5-point setting VF5 voltage
：
V/f 5-point setting VF3 frequency
：
V/f 5-point setting VF3 voltage
Refer to 5.10.7 for details.
