TMPM4K Group(1)
Product Inromation
2018-09-18
75 / 89
Rev. 2.1
2.11.3. Internal signal connection specification
2.11.3.1. T32A/A-PMD Connection
In the A-ENC, there is a signal connected with the peripheral function inside in addition to this as shown in the
following table.
"-" in the table does not have an applicable function.
Table 2.58 A-ENC Internal connection specification: Input
Channel
Function Input
Input source
Signal
Signal Name
ch0
General purpose timer output
signal
ENC0PSGI
T32A ch0 Timer
output A
T32A00OUTA
PWM signal for sampling
ENC0PWMON
A-PMD ch0 PWM
signal
PMD0PWMON
Table 2.59 A-ENC Internal connection specification: Output
Channel
Function output
Trigger
selector
Output destination
Signal
Signal name
ch0
Divided pulse signal
ENC0TIMPLS
[TSEL0CR8]
<INSEL35>
T32A ch4 Timer A
Capture trigger input
T32A04TRGINAPHCK
Commutation trigger
ENC0CTRGO
-
A-PMD ch0
commutation trigger
(Electrical angle
synchronous)
ENC0CTRGO
Encoder input interrupt 0 INTENC00
-
A-PMD ch0
commutation trigger
(ENC position detection
synchronous)
INTENC00