System Parameters
Configuring Stratagy
Stratagy DK I&P R2 November 1998
2-11
Refer to the Stratagy Library CD-Rom for more details.
n_ochan
Number of dedicated ports (starting at port 1) to reserve for outbound notify
ports. This number must not exceed the total number of available ports.
When set, the defined port will not accept incoming calls.
Important!
If the value is set to 0, Stratagy will attempt to use the
highest numbered IDLE port. The danger of this is that
Stratagy may inadvertently begin a notification on a port
with an incoming call.
Possible values:
0 ~ 24 (number of ports)
Default:
0
nam_maxlen
Maximum number of seconds to allow for recording a User ID’s name. The
name recording is used for directory access and whenever Stratagy tries to
identify the User ID.
Possible values:
1 ~ 99 (seconds)
Default:
5
new_send
When this option is set to ‘True’, it allows a User ID to send a message to
multiple User ID’s without creating a destination list.
Possible values:
true, false
Default:
false
notify_
restriction
Whether Stratagy restricts Notify to use only the defined port. The port still
takes incoming calls. This is particularly useful for those switches that
require message lights to be turned off by the same port that turned them
on.
Possible values:
1, 2, ..., highest port number
Default:
comment line (#set notify_restriction 1)
To enable, remove the starting # and set the value.
partial_q_ok
This option set to true enables the
Q( )
token to save the message even
though not all prompts are completed.
Possible values:
true, false
Default:
false
password
Sets the system password. The password is case sensitive; i.e., uppercase
letters are different from lowercase letters.
Possible values:
up to eight alphabetical characters. The single quotes are
required.
Default:
‘Stratagy’
pbx_type
Defines the model of Strata DK that is used as the host system.
Possible values:
DK1440, DK1440S, DKABCD, DKABCDS, DKEF, DKEFS
Default:
DKabcd
Important!
For more details see “Toshiba Plug and Play” on Page
1-23
Table 2-18
Stratagy DK System Configuration Parameters - Definitions and
Settings
(Cont.)
Parameter
Description
H
