Toshiba Stratagy DK Installation & Programming Manual Download | Manualshive

Page: 16 / 84

background image

Stratagy DK

Installation

1-8

Stratagy DK I&P R2 November 1998

Refer to the Stratagy Library CD-Rom for more details.

Table 1-14

Stratagy DK Slot Assignment

DK424

Note

For the DSS/BLF feature, the Stratagy DK must reside in a higher-numbered
slot than the PDKU card that the Stratagy DK will monitor (

).

Install the card in a universal slot starting with slot 12 (if a PDKU or PEKU is in slot 11) or
slot 13 (if a RSIU is in slot 11).

Important!

Do not install the Stratagy DK in slots 27, 28, 31, 37, 38, 47, 48, 51,
57, 58, 67, 68, 71, 77, or 78.

To enable end-to-end signalling, ensure that an RRCS -4, -8 or -12 is installed on the
RCTU, and verify that the RCTU code in Program 03 is for RRCS operation.

DK280

Note

For the DSS/BLF feature, the Stratagy DK must reside in a higher-numbered
slot than the PDKU card that the Stratagy DK will monitor (

).

Install the card in any universal slot (except slots 11, 31 and 51), starting with slot 12 of
the Base Cabinet.

Important!

The Stratagy DK does not function when installed in slots 11, 31 or
51.

To enable end-to-end signalling, an RRCS -4, or -8 must be installed on the RCTU. Verify
that the RCTU code in Program 03 is for RRCS operation.

DK16/40

Install the Stratagy DK in any slot in the Expansion KSU where an eight-port card can be
inserted.

A K4RCU3/K5RCU must be installed in the Base KSU to enable end-to-end signalling.

Note

Putting a Stratagy DK into a Strata DK16 or DK40, eliminates eight

extension ports.

DSS/Busy Lamp Feature

For the DSS/Busy Lamp feature to operate (

see “Busy Station Identification” on Page 1-5

for detailed information), the Stratagy DK must monitor the DSS/BLF data from a specific
PDKU card. The Strata DK telephone system restricts this capability to certain
configurations:

◆

Stratagy DK cannot be installed in the first slot of any cabinet (i.e., 11~71).

◆

The Stratagy DK can only monitor a PDKU that resides in an odd-numbered cabinet.

◆

Stratagy DK must always be in a higher-numbered slot than the PDKU card, even if
the PDKU is in another cabinet.

When Stratagy DK is installed in an odd-numbered cabinet, the system software
searches for the PDKU in all lower-numbered card slots in that cabinet (as defined in
chapter 2 by the parameter

“console_slot_id” on Page 2-4

). When the Stratagy DK is

installed in an even-numbered cabinet, the system software searches for the PDKU in all
lower-numbered card slots of the preceding odd-numbered cabinet. If Stratagy DK is
installed in the cabinet above the cabinet the PDKU is installed, Stratagy DK must also
reside in a higher slot (ie PDKU slot 31 Stratagy must be installed in slot 42~46)

Figure 1-3 on Page 1-9

for examples.

H

«
...
14
15
16
17
18
...
»

Summary of Contents for Stratagy DK





















































































Reviews:

No comments

Related manuals for Stratagy DK

Brand: Yosin Pages: 84

Univerge UM8000

Brand: NEC Pages: 2

VOICE MAIL SYSTEM-VOICE MENU

Brand: ASCOM Pages: 2

ASCOTEL VOICE MAIL SYSTEM AVS 5150

Brand: ASCOM Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands