Toshiba Stratagy DK Installation & Programming Manual Download Page 44

Page: 44 / 84

Stratagy DK

Installation

1-36

Stratagy DK I&P R2 November 1998

Refer to the Stratagy Library CD-Rom for more details.

When the restore is complete, the following status message is displayed.

CAUTION!

If Stratagy is not rebooted, all ports will remain in an off-hook condition.

Press

to reboot Stratagy.

The portable/desktop computer returns to the

C:\ADMIN3

DOS prompt. When the

Stratagy DK status light becomes a solid green, Stratagy is operational.

Note

You will not be able to reconnect to Stratagy using Stratagy Admin until the
Stratagy DK status light is green. Any attempt prior to that time will fail.

Upgrade Stratagy Software

To upgrade Stratagy system software, you will need the correct set of software.

CAUTION!

Because of possible errors that can be induced through the telephone
network, Toshiba advises that the Upgrade Utility be performed onsite.

From the Tools menu, press

The following menu is displayed:

Place the upgrade disk into the portable/desktop computer’s floppy-disk drive.

The default directory is A:. If you need a different drive, type over the default. Press

Enter

Restore successful. Reboot Stratagy? [NY]

Upgrade

WARNING:

Stratagy Voice Processing will be
suspended. Any existing
connection will be broken.

Upgrade from directory:

ESC/Exit F1/Help

Summary of Contents for Stratagy DK





















































































Search results

Summary of Contents for Stratagy DK

Reviews:

Related manuals for Stratagy DK

Brands by name

Popular brands

Toshiba Stratagy DK, Installation & Programming Manual

Search results

Summary of Contents for Stratagy DK

Reviews:

Related manuals for Stratagy DK

Brands by name

Popular brands