Toshiba Strata AirLink Installation Manual Download Page 35

Page: 35 / 117

BSIA System Installation

Step 8: Copy Upgrade Software

Strata AirLink Installation Guide 5/00

Step 8: Copy Upgrade Software

1. Place the Strata AirLink

floppy disk #2 into drive A:\.

2. In Windows 98/95, double-

click the My Computer icon

...or in Windows 3.11/3.1,
open Program Manager.

3. Navigate to the A:\ drive.

4. From the A:\ drive, highlight

the file to be copied.

5. From the Edit pull-down

menu, double-click Copy.

All of the highlighted files are copied to the clipboard.

6. Navigate to the

C:\Wireless\Software
subdirectory.

7. From the Edit pull-down

menu, double-click Paste.

All of the files on the clipboard are pasted to the
subdirectory.

8. Close all the windows and

return to the Strata Airlink
Manager application.

3332

3505

Summary of Contents for Strata AirLink






















































































































Search results

Summary of Contents for Strata AirLink

Reviews:

Related manuals for Strata AirLink

Brands by name

Popular brands

Toshiba Strata AirLink, Installation Manual

Search results

Summary of Contents for Strata AirLink

Reviews:

Related manuals for Strata AirLink

Brands by name

Popular brands