Toshiba Satellite M40X-119 User Manual Download Page 67

Page: 67 / 170

User’s Manual

3-13

Getting Started

4. Follow the on-screen instructions.
5. If your computer came with additional software installed, this software

can not be recovered from the Product Recovery disk. Re-install these

applications (e.g. Works Suite, DVD Player, Games, etc.) separately

from other media.

Restoring TOSHIBA utilities and drivers

If Windows is working properly, individual drivers or applications can be

separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD)

contains drivers and applications, which are included with your computer

system. If your system drivers or applications have become damaged in

some way, you can reinstall most of the components from this folder.
Create a copy of this folder to an external media for more convenience.

Summary of Contents for Satellite M40X-119











































































































































































Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands

Toshiba Satellite M40X-119, User Manual

Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands