User’s Manual
6-13
Power and Power-Up Modes
Power-up modes
The computer has three power-up modes:
■
Hibernation (saves data in memory to the hard disk)
■
Standby (Power remains on, saving data in RAM, but the CPU and all
other devices enter sleep mode.)
■
Boot (does not save data in memory)
Panel power off/on
In AC mode, this feature turns power to the computer off when the display
panel is closed and turns it back on when the panel is opened.
In Battery mode, the Hibernation feature turns power to the computer off
when the display panel is closed and cannot turn it back on when the panel
is opened. The Standby feature turns power to the computer off when the
display panel is closed and turns it back on when the panel is opened.
System automatic Standby/Hibernation
This feature automatically turns off the system in Standby or Hibernation
mode if the computer is not used for a set duration.
Refer to Special Features, in Chapter 1,
Introduction
for an explanation of
how to set the duration.
If you enter the password incorrectly three consecutive times,
the computer shuts down. You must turn on the computer again
and re-enter the password.
Refer also to the section Turning off the power in Chapter 3, Getting
Started.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.
Summary of Contents for Satellite M40X-119
