Toshiba Satellite M40X-119 User Manual Download Page 97

Page: 97 / 170

User’s Manual

4-29

Operating Basics

Moving the computer

The computer is designed for rugged durability. However, a few simple

precautions taken when moving the computer will help ensure trouble-free

operation.

■

Make sure all disk activity has ended before moving the computer.

Check the

Built-in Hard Disk Drive

and

optical disc drive

indicators

on the computer.

■

If a diskette is in the diskette drive, remove it.

■

If a disc is in the optical disc drive, remove it. Also make sure the optical

disc drive drawer is securely closed.

■

Turn off the power to the computer.

■

Disconnect all peripherals before moving the computer.

■

Close the display. Do not pick up the computer by its display panel or

back (where the interface ports are located).

■

Close all port covers.

■

Disconnect the AC adapter if it is connected.

■

Use the carrying case when transporting the computer.

Summary of Contents for Satellite M40X-119











































































































































































Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands

Toshiba Satellite M40X-119, User Manual

Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands