User’s Manual
7-3
HW Setup
CPU
This function lets you set the CPU operating mode.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
FDD is looked for when the boot disk is contained in external hard disk
drive.
To select the boot drive you want, follow the steps below.
1. Boot-up your computer and press
F12
to enter the boot menu.
2. The boot select screen will be displayed: Hard Disk Drive, CD/DVD,
FDD, and LAN.
3. Use the upper/lower cursor keys to highlight the boot device you want
and press
Enter
.
It is displayed in Pentium-M model only.
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation is
automatically switched when necessary
(Default).
Always Low
CPU power consumption and clock speed
automatic switching function is disabled.
The CPU always runs at low power consumption
and low speed.
U
Selects the USB floppy disk drive.
N
Selects the Network.
C
Selects optical device.
Summary of Contents for Satellite M40X-119
