Toshiba Satellite M40X-119 User Manual Download Page 27

Page: 27 / 170

User’s Manual

1-1

TOSHIBA M40X Series

Chapter 1

Introduction

This chapter provides an equipment checklist, and it identifies the

computer’s features, options and accessories.

Equipment checklist

Carefully unpack your computer. Save the box and packing materials for

future use. Check to make sure you have all the following items:

Hardware

■

TOSHIBA M40X Series Portable Personal Computer

■

Universal AC Adapter and Power Cord

■

USB Floppy Disk Drive (provided with some models)

■

Modular cable for modem (provided with some models)

Basic features are described in a separate pamphlet.

Some of the features described in this manual may not function properly if

you use an operating system that was not preinstalled by TOSHIBA.

Summary of Contents for Satellite M40X-119











































































































































































Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands

Toshiba Satellite M40X-119, User Manual

Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands