Toshiba Satellite M40X-119 User Manual Download Page 128

Page: 128 / 170

8-6

User’s Manual

Optional Devices

Removing a memory card

To remove a memory card, follow the steps below.
1. Click the

Safely

Remove Hardware

icon on the Task Bar.

2. Stop a memory card device
3. Grasp the card and remove it.

Removing a memory card

■

Make sure the memory card indicator is out before you remove the

card or turn off the computer's power. If you remove the card or turn off

the power while the computer is accessing the card you may lose data

or damage the card.

■

Do not remove

the

card while the computer is in Standby or Hibernation

mode. The computer could become unstable or data in the memory

card could be lost.

■

Do not turn off or make computer in Standby or Hibernation mode

during data is being transferred. The computer could become unstable

or data in the memory card would be lost.

Summary of Contents for Satellite M40X-119











































































































































































Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands

Toshiba Satellite M40X-119, User Manual

Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands