User’s Manual
4-17
Operating Basics
When writing or rewriting
Please observe/consider the following when you write or rewrite to a
CD-R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
■
Do not perform any of the following actions when writing or rewriting:
■
Change users in the Windows XP operating system.
■
Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
■
Start a communication application such as a modem.
■
Apply impact or vibration to the computer.
■
Install, remove or connect external devices, including the following:
PC card, USB devices, external display, optical digital devices.
■
Use of the Audio/Video control button to reproduce music or voice.
■
Open the drive.
■
Do not use shut down/log off and standby/hibernation while writing or
rewriting.
■
Make sure writing or rewriting is completed before going into
standby/hibernation. Writing is completed if you can open the drive tray.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.
■
Always copy data from the Hard Disk Drive to the DVD-RAM. Do not
use cut-and-paste. The original data will be lost if there is a write error.
Summary of Contents for Satellite M40X-119
