Toshiba Satellite M40X-119 User Manual Download Page 15

Page: 15 / 170

User’s Manual

General Precautions

Express Media Player

The Express Media Player is not a Windows

based application. Battery life

will be less than when using similar applications in the Windows Operating

System.

LCD Brightness and Eye Strain

Your LCD display has a brightness approaching that of a TV device. We

recommend that you adjust the brightness of your LCD to a comfortable

level to prevent possible strain on your eyes.

CE compliance

This product and the original options are designed to observe the related

EMC (Electromagnetic Compatibility) and safety standards. However,

TOSHIBA cannot guarantee that this product still observes these EMC

standards if options or cables not produced by TOSHIBA are connected or

implemented. In this case the persons who have connected / implemented

those options / cables have to provide assurance that the system (PC plus

options / cables) still fulfils the required standards. To avoid general EMC

problems, the following guidance should be noted:

■

Only CE marked options should be connected / implemented

■

Only best shielded cables should be connected

Working environment

This product was designed to fulfill the EMC (Electromagnetic

Compatibility) requirements to be observed for so-called “Residential,

commercial and light industry environments”.
TOSHIBA do not approve the use of this product in working environments

other than the above mentioned “Residential, commercial and light industry

environments”.
For example, the following environments are not approved:

■

Industrial Environments (environments with a mains voltage >230V~)

■

Medical Environments

■

Automotive Environments

■

Aircraft Environments

Any consequences resulting from the use of this product in working

environments that are not approved are not the responsibility of TOSHIBA

Europe GmbH.

If this product is supplied with a network port, please refer to the paragraph

“Network connection”.

Summary of Contents for Satellite M40X-119











































































































































































Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands

Toshiba Satellite M40X-119, User Manual

Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands