Toshiba Satellite M40X-119 User Manual Download Page 77

Page: 77 / 170

User’s Manual

4-9

Operating Basics

4. Lay the disc, label side up, in the drawer.

Inserting a disc

5. Press gently at the center of the disc until you feel it click into place.

The disc should lie below the top of the spindle, flush with its base.

6. Push the centre of the drawer to close it. Press gently until it locks in

place.

Closing the drive drawer

Be careful not to touch the lens or the area around it. Doing so could cause

the drive to malfunction.

If the disc is not seated properly when the drawer is closed, it might be

damaged. Also, the drawer might not open fully when you press the eject

button.

Summary of Contents for Satellite M40X-119











































































































































































Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands

Toshiba Satellite M40X-119, User Manual

Search results

Summary of Contents for Satellite M40X-119

Reviews:

Related manuals for Satellite M40X-119

Brands by name

Popular brands