– 60 –
10-2. Optional Parts, Accessories and Tools
10-2-1. Optional Installation Parts
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and nuts
if the unit is likely to be exposed to a strong wind.
• Use Ø8 mm or Ø10 mm anchor bolts and nuts.
If it is necessary to drain the defrost water, attach drain nipple
to the base plate of the outdoor unit before installing it.
Suction side
Diffuser
Elongated
drain hole
(
)
Drain hole
(
)
10-2-2. Accessory and Installation Parts
Part Code
Y
Z
Parts name
Refrigerant piping
Indoor unit name
Liquid side (Outer diameter)
Gas side (Outer diameter)
RAS-B10GKVP-E, B13GKVP-E
6.35 mm
9.52 mm
RAS-B16GKVP-E
6.35 mm
12.7 mm
Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick)
Q’ty
1 ea.
1
Part No.
Part name (Q’ty)
Installation plate × 1
Wireless remote control × 1
Battery × 2
Remote control holder × 1
Part No.
Part name (Q’ty)
Zeolite-plus filter × 1
Plasma pure filter × 1
Mounting screw Ø4 × 25L × 6
Remote control
holder mounting screw
Ø3.1 × 16L × 2
Part No.
Part name (Q’ty)
Drain nipple
∗
× 1
(Heat pump models only)
Water-proof rubber cap
∗
× 2
(Heat pump models only)
Parts marked with asterisk (
∗
) are
packaged with the outdoor unit.
This model is not equipped with an extension drain hose.
<Others>
Name
Owner’s manual (Indoor unit)
Installation manual (Indoor unit)
Installation manual (Outdoor unit)
Specifications (Outdoor unit)
