– 112 –
The back body section is hooked
onto the bottom plate here.
Hook the claw
onto the bottom
plate here.
A
B
C
Detail A
Detail B
Detail C
Fan motor
Propeller fan
Flange nut
No.
5
6
Part name
Side cabinet
Fan motor
Procedure
1. Side cabinet (right)
1) Perform step 1 in
2
and all the steps in
3
.
2) Remove the fixing screw (ST1TØ4 × 8L
5 pcs.) used for securing the side
cabinet to the bottom plate and valve
fixing panel.
2. Side cabinet (left)
1) Perform step 1 in
2
.
2) Remove the fixing screw (ST1TØ4 × 8L
1 pcs.) used to secure the side cabinet
(left) onto the heat exchanger.
3) Remove the fixing screw (ST1TØ4 × 8L
2 pc.) used for securing the side cabinet
to the bottom plate and heat exchanger.
1) Perform work of item 1 of
1
and
2
.
2) Remove the flange nut fixing the fan motor
and the propeller.
• Flange nut is loosened by turning clockwise.
(To tighten the flange nut, turn
counterclockwise.)
3) Remove the propeller fan.
4) Disconnect the connector for fan motor
from the inverter.
5) Remove the fixing screws (2 pc.) holding by
hands so that the fan motor does not fall.
∗
Precautions when assembling the fan
motor.
Tighten the flange nut using a tightening
torque of 4.9 N•m.
Remarks
