– 102 –
Lead wire
cover
TC sensor
TC sensor
Fan motor
connector
Louver motor
connector
Fan motor
connector
Louver motor
connector
Screw
Fixing screw
Make absolutely sure that
the leads form a loop
Press the
drain pan
Press the
drain pan
Pull the display
unit toward you
No.
3
Part name
Electric parts
box assembly
Procedures
1) Follow the procedure up to 4) in
2
above.
2) Remove screw of earth lead attached to the
end plate of the evaporator.
3) Remove the lead wire cover, and remove
connector (5P) for the fan motor and
connector (5P) for the louver motor from the
electric parts box assembly.
4) Pull out TC sensor from sensor holder of the
evaporator.
5) Disengage the two claws at the top of the
display unit.
(They can be easily disengaged by pressing
the drain pan above the claws and at the same
time pulling the display unit toward you.)
6) Remove the fixing screw that secures the
electric parts box assembly, and remove the
assembly.
<How to assemble the electric parts box>
1) Hook the top part of the electric parts box
assembly onto the claws on the back body,
and secure it using the fixing screw.
Now attach the display unit.
Connect the connectors for the fan motor
and louver motor.
2) Secure the grounding wire using the fixing
screw.
Insert the TC sensor into the sensor holder.
∗
Be absolutely sure to loop the grounding
wire and TC sensor leads once at the
bottom.
Remarks
