Toshiba MD-VNK802HEXE, Service Manual

Page: 132 / 214

130
Owner’s Manual
6
Timer Operation
Select a timer type from the following three: (Max. 168 hours)
„
Setting the timer
1
Push the button to start operation.
The operation lamp lights up.
2
Push the button.
Each time the button is pushed, the timer mode
and indication change in the following order:
and the time indication blink.
3
Push the buttons to set the period of
time until the timer actions.
• The time setting increases in 0.5-hour (30
minute) increments each time you push .
The setting increases in 1-hour increments if it is
over 1 day (24 hours). The maximum is 7 days
(168 hours).
On the remote controller, settings between 0.5
hours and 23.5 hours (*1) are displayed as is.
For settings over 24 hours (*2), the days and
hours are displayed.
• The time setting decreases in 0.5-hour (30
minute) decrements (0.5 hours to 23.5 hours) or
1-hour decrements (24 hours to 168 hours)
each time you push
.
Example of indication on the remote controller
• 23.5 hours (*
1
)
• 34 hours (*
2
)
4
Push the button.
• disappears, the time indication is
displayed, and or flashes.
(When using the ON timer, all indications other
than the time indication and
turn off.)
„
Cancelling the timer
1
Push the button.
The timer indicator disappears.
NOTE
• When using the Repeat-OFF timer, pressing the
button after the unit has been stopped by
the timer starts it running again, and the unit will stop
again after the specified period.
• The nighttime heat purge operation is activated, the
unit is running the activated operation while the unit
stops following the timer setting.
OFF timer : Stops running after a specified period.
Repeat-OFF timer : Stops running after a specified period every time you use the unit.
On timer : Starts running after a specified period.
(OFF timer) (ON timer) (Repeat-OFF timer)
No indication
indicates 1 day
(24 hours).
indicates 10 hours.
(Total: 34 hours)
Days Hours