77
Viewing
・
Listening
and Operation
Introduction
Set up
Recording
Others
② Paint out any square you want to set the sensor by clicking it
・To undo this action, click the square again.
Setting the sensor outside the current displayed range of the screen
(1)
In the left side of the window for configuring the range, click
the
button.
(2)
Paint out any square you want to set the sensor by clicking it
・Click the
all ON
button to paint out all squares.
・Click the
all OFF
button to unset all squares.
③ Click the
save
button
・The settings are saved and the window for configuring the range
closes.
・Clicking the
close
button closes the window for configuring the
range without saving the changes.
NOTE
●
The squares you have selected as the motion detection range will be turned
to transparent green.
●
Squares set for Privacy Mask (
→
page 85) are already painted out in (dark) black.
●
Clicking the
reset
button discards all unsaved changes.
・ Associate to P/T Operation (camera operation when a motion
alarm went off)
OFF
: The lens will not move even if an alarm has generated.
Preset
: The lens moves to the preset position specified for
"Preset No."
Auto Patrol
: The lens moves each preset positions in order, and after
one lap, moves back to the position where before the
Alarm has generated.
