15
Viewing
・
Listening
and Operation
Introduction
Set up
Recording
Others
To close the camera image, click the
button in
the upper-right corner of the window
For an explanation on each component of the Single-View Mode window,
refer to the table below.
1
2
10
4
5
6 7
9
8
3
Number and Item
Description
!
Alarm
!
Alarm
Multi view
Multi view
LIVE
PLAY BACK
LIVE
PLAY BACK
① Camera name
The name of the camera displaying live images.
② Alarm notification
This is displayed if the network camera detects motion (→
page 75) or an alarm goes off (→page 72). The
disappears if it is clicked.
③ Displayed images
When displaying present normal images,
will
be displayed, and when displaying images from the
Alarm List or Record List (IK-WB11A),
will be
displayed on the screen. You can switch these views
using the controller.
④ Time and date
The current time and date of the network camera are
shown when
is displayed, and the recorded
time and date* are shown when
is displayed
on the screen. When in PLAYBACK mode, S) or E) may
be shown with the time and date. S) (Start) indicates
that the image is at the top of the playback images,
and E) (End) indicates that the image is at the end. In
this state, image or the time and date will not be
renewed. Perform playback operation from the
controller.
*When playing images recorded in 1-second cycle on
the SD memory card, even if images may seem to
renewed in 2-second cycle, the images were recorded
in 1-second cycle.
⑤ Switch views
Clicking the button switches the single-view
mode to multi view. For details on multi view, refer to
"Viewing Images in Multi-View Mode by Administrator"
(→page 18).
⑥ Switch sound on/off
If you click the button, the button changes to
and outputs the sound. Clicking the button
changes the icon back to and stops the sound.
⑦ Display controller
Clicking the button displays the controller in a
separate window.
