Toshiba IK-WB01A User Manual Download Page 62

Page: 62 / 142

Viewing

・

Listening

and Operation

Others

Set up

Introduction

Recording

Configure each setting

・For details on configuring settings, refer to "Main Setting Items" (→

page 63) or "Setting Items" (→ page 90).

After you have configured all the settings, click the

save

button

・The settings are registered in the network camera and a message

appears to inform you that camera configuration is complete.

・If you want to configure other settings, click another toggle (＋) or

menu and select the submenu of the settings you want to configure.
Then, repeat Steps 4 and 5 above.

Important

●

If the settings were configured incorrectly, they are not registered in the
network camera and an input error message appears. Read the error message
and reconfigure the settings accordingly.

●

To register the settings in the network camera, be sure to click the

save

button. The settings are not registered in the network camera when:

・You close the setting window before saving the changes.
・ You click another menu in the left side of the window and different settings

appear.

NOTE

●

Clicking the

reset

button instead of clicking

save

button at Step 5

restores the previous configuration.

●

You do not need to restart the network camera to reflect the settings you
have configured in the setting menus.

Configuring the Camera (Cont.)

Summary of Contents for IK-WB01A















































































































































Search results

Summary of Contents for IK-WB01A

Reviews:

Related manuals for IK-WB01A

Brands by name

Popular brands

Toshiba IK-WB01A, User Manual

Search results

Summary of Contents for IK-WB01A

Reviews:

Related manuals for IK-WB01A

Brands by name

Popular brands