Toshiba ESTIA HWS-1501CSHM3-E, Service Manual

Page: 129 / 212

128
1-6. SW13 (System switching 3)
2. Hydro unit Function Code Setting
2-1. How to set function code
<Procedure> Perform the following when no operation is in progress.
1
Press the SET and TEST and SELECT
buttons at the same time for 4 seconds or longer.
(See display
)
2
Specify CODE NO. (FC) with the TEMP. button
for temperature setting.
3
Select a setting data with the TIME button for timer
setting.
The value in the DATA item changes.
4
Press the SET button. (If lights, the status is
confirmed)
To change the item to be set, go to
2
.
5
Pressing the TEST button moves the unit to the normal
stop state.
2-2. How to set remote controller function code
This operation can set the start and end time of the night time low noise, anti bacteria, night set back, or other
functions.
<Procedure> Perform the following when no operation is in progress.
1
Press the TEST and CL and TEMP. buttons at
the same time for 4 seconds or longer. (See display )
appears on the left.
2
Specify CODE NO. (FC) with the TEMP. button
for temperature setting.
3
Select a setting data with the TIME button for timer
setting.
The value in the DATA item changes.
4
Press the SET button.(If the blinking changes to lit, the
status is normal)
To change the item to be set, go to
2
.
5
Pressing the TEST button moves the unit to the normal
stop state.
SW13 Switching details Factory default Remarks
13_1 3WV SPST/SPSD Specification switching SPST OFF
13_2 Boiler output enabled No OFF
13_3 Auto Restart of power outage Yes OFF
13_4 – – OFF
2
3
4 5 1
2
3
4
1 5