Toshiba E-STUDIO520, Service Manual, Page: 573 / 592

March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 DATA CLONING with USB STORAGE DEVICE
9 - 9
9
(21) Press the [5] button.
The screen to select the SRAM data backup item is displayed. In this screen, the item to be
backed up is shown after the mark "*". (The item is not selected in the screen by default.)
Fig.9-12
(22) Select the item to be backed up with the digital keys.
The mark "*" is shown on the selected item. The mark "*" can be deleted or added each time the
corresponding digital key is pressed.
•
To back up the data individually, select the following item.
<Backing up SRAM Data>
Select "1. SRAM".
Note: Note:
The backup/restore of the SRAM data can be performed only for the same model.
The ROM version must be the same when the data are backed up and restored.
(The following screens are given as an example of when SRAM data are backed up.)
(23) Press the [Start] button.
The backup starts and the backing up status is displayed on the LCD screen.
Fig.9-13
05/11