6. ON LINE MODE
EO18-33027
6. 11 LCD MESSAGES AND LED INCATIONS
6-26
suitable for the actual media.
The gap of label cannot be
detected due to pre-printing.
6 CUTTER ERROR
●
A paper jam occurred in the
cutter.
The cutter did not move from the
home position.
The cutter cover was open.
Yes
Yes
7 NO PAPER
●
The media has run out.
The media has not been set.
Media sensor level is not suitable
for the paper used.
Yes
Yes
8 NO RIBBON
●
The ribbon has run out.
Yes
Yes
9 HEAD OPEN
●
A feed or an issue was attempted
with the head opened.
(Except media feed caused by
the [FEED] key or Expansion I/O)
Yes
Yes
10 HEAD ERROR
●
A broken dot error has occurred
in the thermal head.
The error has occurred in the
head driver.
Yes
Yes
11 EXCESS HEAD
TEMP
●
The thermal head temperature
has become excessively high.
No
Yes
12 RIBBON ERROR
●
An abnormal condition occurred
with the sensor for determining
the torque of the ribbon motor.
A ribbon jam occurred.
The ribbon has been torn.
The ribbon has not been set.
Yes
Yes
13 REWIND FULL
●
An overflow error has occurred in
the rewinder unit.
Yes
Yes
14
SAVING
####KB/&&&&KB
or
SAVING %,%%%.%%
%KB
●
Writable characters or PC
command save mode.
---
Yes
15
FORMAT
####KB/&&&&KB
or
FORMAT %,%%%.%%
%KB
●
Initializing the storage area.
---
Yes
16 NOW LOADING…
●
Downloading TrueType font or
BASIC program
---
Yes
17 MEMORY WRITE
ERR.
●
An error has occurred while
writing data into the memory for
storage. (USB memory, flash
ROM on the CPU board)
No
Yes
18 FORMAT ERROR
●
An erase error has occurred while
formatting the memory for storage
(USB memory, flash Rom on the
CPU board)
No
Yes
19 MEMORY FULL
●
Saving failed because of the
insufficient capacity of the
memory for storage (USB
memory, flash ROM on the CPU
board)
No
Yes
20 SYNTAX ERROR
●
A command error has occurred
Yes
Yes
