5. SYSTEM MODE
EO18-33027
5.5 ADJUST SET
5-56
5.5.7
RBN ADJ.<FW>
The reference section depends on the model.
Refer to
Applicable model
8.5.7.1 RBN ADJ.<FW>
Other than below.
8.5.7.2 RBN ADJ.<FW>
B-EX4T1-G/T-QM/CN C1.2 or later
B-EX4T2-G/T-QM/CN C1.2 or later
B-EX4T2-H-QM/CN C1.1A or later
B-EX4D2-G/T-QM/CN D1.1 or later
8.5.7.2.1 TYPE1
8.5.7.2.2 TYPE2
NOTE: This parameter is not used for the B-EX4D2-G/T.
5.5.7.1 RBN ADJ.<FW>
Max.
value
Min. value
Step
Display
Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
10
-15
1
Decimal
Exist
2
0
None
Step
The fine adjustment value is not effective for the reverse rotation.
The fine adjustment value for the ribbon take-up motor is limited depending on the print speed.
NOTE: Since the B-EX4D2 is a direct thermal printer, this parameter is displayed but not used for actual
printing.
Print speed
6 ips or slower
8 ips
10 ips or faster
Fine adjustment value
-15 to +10
-15 to +5
-15 to 0
*1: For the B-EX4T1-TS25-R firmware version V2.0 or later, each time the fine adjustment value is
changed by one, the factor changes by 3%, in the case the factor of fine adjustment value “0” is 100%.
B-EX4T1-TS25-R V2.0 or later
Fine adjustment value
Factor
*1
Fine adjustment value
Factor
*1
+10
130%
-3
91%
+9
127%
-4
88%
+8
124%
-5
85%
+7
121%
-6
82%
+6
118%
-7
79%
+5
115%
-8
76%
+4
112%
-9
73%
+3
109%
-10
70%
+2
106%
-11
67%
+1
103%
-12
64%
0
100%
-13
61%
-1
97%
-14
58%
-2
94%
-15
55%
