Toshiba B-EX4 SERIES, Maintenance Manual

Page: 168 / 294

5. SYSTEM MODE
EO18-33027
5.8 RAM CLEAR
5-72
(Transmissive sensor)
Print control (Thermal transfer)
B-EX4T1-G/T-QM/CN C1.4 or before
Semi resin1 --- Semi resin1
Print control (Thermal transfer)
B-EX4T1-G/T-QM/CN C1.5 or later
Semi resin 1 --- SX compatible
Print control (Thermal transfer)
B-EX4T2-G/T-QM/CN C1.2 or before,
B-EX6T2-G/T
Wax1 --- Wax1
Print control (Thermal transfer)
B-EX4T2-G/T-QM/CN C1.3 or later
Wax 1 --- Multiple type
Print control (Thermal transfer)
B-EX4T2-H
Resin1 --- Resin1
Print control (Thermal transfer)
B-EX4D2-G/T
Wax 1 Wax 1 Wax 1
Print control (Direct Thermal) Standard Standard Standard
Length of time to power save
mode 15 minutes 15 minutes 15 minutes
Ribbon width TYPE1 (*1) --- TYPE1 (*1)
*1: Supported by the B-EX4T1-G/T-QM/CN C1.2 or later, the B-EX4T2-G/T-QM/CN C1.2 or later, B-EX4T2-H-QM/CN
C1.1A or later, and B-EX4D2-G/T-QM/CN D1.1 or later.
Parameter setting/LCD display
Function QM QQ CN
LCD display language English English English
B-EX4T1 before C1.0:
Chinese
B-EX4T1 C1.0 or later:
B-EX4T2
B-EX6T2
B-EX4D2
LCD detail display: model
name ON ON ON
LCD detail display: print
number
ON ON ON
LCD detail display: IP
address OFF OFF OFF
Contrast adjustment 40 40 40
Parameter setting/Password setting
Function QM QQ CN
Password enable/disable Not cleared Not cleared Not cleared
Password value Not cleared Not cleared Not cleared
Fine adjustment value setting
Function QM QQ CN
Feed amount 0.0mm 0.0mm 0.0mm
Cut position 0.0mm 0.0mm 0.0mm
Back feed 0.0mm 0.0mm 0.0mm