Toshiba 8100 series User Manual Download Page 265

Page: 265 / 350

Part II: Technical Reference

Troubleshooting Guide

DVD operating problems–Windows 98 Second Edition

239

Error messages

The following table offers descriptions and resolutions for error
messages that may appear when using DVDExpress.

Error message and additional information

Resolution

The disc in the DVD-ROM drive is not a valid
disc type.

Valid disc types are DVD-Video, VideoCD, and
audio CD.

Ensure the disc is a valid
disc type.

If the disc works in other
players, try using a disc
cleaner.

The disc may require
features that are not
supported by
DVDExpress.

Microsoft DirectShow components are
missing.

Microsoft DirectShow is not installed properly on
the system.

Reinstall Microsoft

DirectShow version 6.0

or higher (available from
the Microsoft Web site).

No audio subsystem could be found for
playback.

There is a problem with the audio card or audio
component within the system. The problem may
be one of the following:

There is no audio card.

The audio card is faulty.

The wrong audio card is installed in the system.

There is a problem with the audio driver.

Check installation of
audio sound card.

Check installation of
sound card drivers.

Summary of Contents for 8100 series































































































































































































































































































































































Search results

Summary of Contents for 8100 series

Reviews:

Related manuals for 8100 series

Brands by name

Popular brands

Toshiba 8100 series, User Manual

Search results

Summary of Contents for 8100 series

Reviews:

Related manuals for 8100 series

Brands by name

Popular brands