Toshiba 8100 series User Manual Download Page 198

Page: 198 / 350

Part II: Technical Reference

Keeping Your Files Safe

Supervisor-level passwords

172

Press

Enter

The Toshiba Companion Utility main menu appears.

Use the arrow keys to select

Exit to DOS

At the A:\ prompt, type

c:\toshiba\svpw

and press

Enter

The following message appears:

SUPERVISOR PASSWORD = Not Registered

Do you want to register the supervisor password <Y/N>?

Type

to set a supervisor password.

The following prompt appears:

Enter Password -->

Type in a password of up to 10 characters and press

Enter

The following prompt appears:

Verify Password -->

Reenter the password and press

Enter

The following message appears:

SUPERVISOR PASSWORD = Registered

If the password is incorrect, the following message appears:

Password verify error!

Do you want to retry <Y/N>?

Type

and reenter the password.

NOTE: After three attempts to enter the correct password, the
utility exits to the system prompt without setting a
supervisor password.

Press

Ctrl

Alt

and

Del

simultaneously to return to Windows.

Summary of Contents for 8100 series































































































































































































































































































































































Search results

Summary of Contents for 8100 series

Reviews:

Related manuals for 8100 series

Brands by name

Popular brands

Toshiba 8100 series, User Manual

Search results

Summary of Contents for 8100 series

Reviews:

Related manuals for 8100 series

Brands by name

Popular brands