49
• Most of the picture/sound controls and functions are
available in both digital and analogue modes� However,
features not available will be greyed out�
Back connections
Connection example
VIDEO
LAN
RGB/PC
HDMI
USB
VIDEO
(A
UDIO)
COMPONENT VIDE
O INPUT
HDMI 3
(AUDIO)
2 (WLAN)
Back and
left side of TV
DVD video player
(with component
video outputs)
Set Top Box
or
VCR (Normal)
• Before connecting any external equipment, turn off all
main power switches�
• The unauthorized recording of TV programmes, DVDs,
video tapes and other materials may infringe upon the
provisions of copyright law�
•
o
(1) connection: Use for the A/V adaptor cable
(supplied) (22-pins: black/3-pins: yellow, white and
red)�
•
o
(2) connection: Use for the component adaptor cable
(supplied) (1-pin: light green/3-pins: green, blue and
red)�
The audio terminals are shared with the
o
(3)�
•
o
(3) connection: Use for the A/V adaptor cable
(supplied) (1-pin: yellow/3-pins: yellow, white and red)�
• You can enjoy video games with this TV. However,
shooting games, where the player shoots at a target on
the TV screen with a light gun may not work because of
the properties of the LCD Colour TV�
Selecting Side Shared Audio
You can select the Side Shared Audio external input
terminals located on the left side of TV
o
(2) and
o
(3)�
1
From
AV Connection
in the
Preferences
menu,
press
s
or
r
select
Side Shared Audio
�
2
Press
v
or
w
to select
EXT 2
or
EXT 3
�
Connecting an audio system
- digital -
You can enjoy high quality dynamic sound by connecting
the TV to an audio system�
Notes:
•
DO NOT connect the
DIGITAL AUDIO
output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
•
Connect the
DIGITAL AUDIO
output terminal to the
OPTICAL
input of a receiver or processor.
•
Refer to the owner’s manual of the connected
equipment as well.
•
When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
•
The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifier’s
volume to a moderate listening level before turning
on the power. Otherwise, the speakers and your
hearing may be damaged by sudden high volume
audio.
•
Turn off the amplifier before you connect or
disconnect the TV’s power cord. If you leave the
amplifier power on, the speakers may be damaged.
Warning:
When you are connecting (via the
DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set
PCM
for Digital Output menu (
-
page 47). Otherwise,
the speakers and your hearing may be damaged by
sudden high volume audio.
Connecting an amplifier equipped with a
Dolby Digital decoder
To
Optical type
digital audio input
Optical digital cable
(not supplied)
Amplifier equipped with
Dolby Digital decoder
Front speaker
Surround speaker
Sub woofer
Centre speaker
Signal flow
To Digital Audio
output terminal
left side of TV
DIGIT
AL
AUDIO
Connecting your TV
110920c1_55WL800AZ_En.indb 49
11.9.21 11:37:31
