27
Using the TV’s features (General)
When 2P is selected:
1
Press
s
to select
2P White Balance
�
2
Press
s
or
r
to select
Red-Offset
,
Green-Offset
,
Blue-Offset
,
Red-Gain
,
Green-Gain
or
Blue-
Gain
3
Press
v
or
w
to adjust the settings as desired�
When 10P is selected:
1
Press
s
to select
10P White Balance
�
2
Press
s
or
r
to select
IRE
(white level),
Red
,
Green
or
Blue
�
3
Press
v
or
w
to adjust the settings as desired�
Colour Calibration
The aim of Colour Calibration is to measure and/or adjust
the colour response(White Balance) of your LCD panel�
Colour Calibration is used by various fields, such as
gaming, photography, engineering, medical and more� In
order to calibrate a display correctly, you need a colour
analyzer
TPA-1
(not supplied)�
Apply Calibration
1
From the
Expert Picture Settings
menu, press
s
or
r
to select
Colour Calibration
and press
OK
�
2
Press
s
or
r
to select
Apply Calibration
and press
v
or
w
to select
Enable
or
Disable
�
Manual Colour Calibration
1
From the
Colour Calibration
menu, press
s
or
r
to select
Manual Colour Calibration
and press
OK
�
Manual Colour Calibration
Red
Green
Blue
0.640
0.300
0.330
0.060
Reset
x
y
Start
0.150
0.600
Please input the value measured with the colour analyser.
2
Place the prove of the colour analyzer over the square
on screen to measure�
3
Input the value measured with the colour analyzer
using the
Number
buttons (0-9)�
Red
Green
Blue
0.640
0.300
0.330
0.060
x
y
0.150
0.600
4
Press
s
,
r
,
v
or
w
and input the values to fill all
RGBxy matrix table�
5
Highlight
Start
and press
OK
� Please wait until you
see “Manual Colour Calibration has been completed”
on screen�
To return to factory setting
Select
Reset
and press
OK
�
Auto Colour Calibration
1
From the
Colour Calibration
menu, press
s
or
r
to select
Auto Colour Calibration
and press
OK
�
2
Place the prove of the USB colour analyzer over the
square on screen and connect USB colour analyzer for
the USB1 or USB2 port, and press
OK
�
Auto Colour
Calibration
will start� Please wait until you see “
Auto
Colour Calibration
has been completed”�
Gamma Calibration
1
In the
Expert Picture Settings menu
, press
s
or
r
to select
Gamma Calibration
and press
OK
�
2
Press
s
or
r
to select
Apply Calibration
and press
v
or
w
to select
Enable
or
Disable
�
3
Press
s
or
r
to select
Auto Gamma Calibration
and press
OK
�
4
Input the target value and place the USB colour
analyzer over the square on screen and, connect USB
colour analyzer for theUSB1 or USB2 port�
Auto Gamma Calibration
Target Colour Temperature
Target Gamma
0.313
2.4
0.329
x
y
Start
Please input the target value and place the USB colour analyser over the square.
(D65)
Reset
5
Select
Start
and press
OK
� Auto Gamma Calibration
will start� Please wait until you see “Auto Gamma
Calibration has been completed” on screen�
To return to factory setting
Select
Reset
and press
OK
�
Resetting the Expert Picture Settings
This feature resets your
Expert Picture Settings
to the
factory settings�
110920c1_55WL800AZ_En.indb 27
11.9.21 11:37:22
