42
Connecting your TV
Note:
IP address field numbers must be between
0 and 255. After each field number has been
set, press
to store the entire address. If
the entire IP Address is invalid, a warning
message will appear after
is pressed.
6
Press
s
or
r
to select
Subnet Mask
, and
edit in the same way as IP Address�
Note:
If you manually set the IP address, you must not
use the same IP address for any other device.
The IP address you use should be a private
address.
MAC Address
You can view the fixed MAC address for the TV
and for the Dual Band WLAN Adaptor, if one is
installed�
1
From the
PREFERENCES
menu, select
Network Setup
and press
�
2
Press
s
or
r
to select
MAC Address
, and
press
�
Using the software keyboard
You can enter text by using the Software
Keyboard� The Software Keyboard window
will appear when you press
on a field that
accepts character input�
To enter text using the software keyboard:
1
Select the desired character on the on-screen
software keyboard�
2
Press
�
3
Repeat steps 1 and 2 until you have entered
all desired text�
4
Press the
BLUE
button to close the software
keyboard and return to the previous screen�
Note:
If
RETURN
is pressed, changes are not saved
and the software keyboard window is closed.
The text will remain as it was before starting
the keyboard.
A
B C D E F G
A
a 1 @
A A A |
H
I
J K L M N
O P Q R S T U
V W X Y Z
Input operation on the remote control:
Button
Description
Inputs the selected character�
0-9
Inputs the number directly�
s
r
v
w
Moves the character select�
CC
cc
Moves the cursor�
Z
Moves the cursor to the head of a
character string�
z
Moves the cursor to the end of a character
string�
RED
Deletes 1 character to the left of the cursor�
GREEN
Cycles through upper case, lower case,
numbers, and symbols, if available�
YELLOW Chooses an accented version of the
current letter, if applicable�
BLUE
Saves changes and closes the Software
Keyboard window�
RETURN
Closes the Software Keyboard window
without saving changes�
Setting up the Media Renderer feature
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be configured as a DMR� When
operating as a DMR, the TV displays content
provided by a DMS� The selection of the media
is done by the DMC - the TV does not select the
input� The TV can play photo, movie, or audio
files when operating as a DMR�
Installation
You can configure the DMR settings individually,
or use Installation mode to be prompted for each
setting in order�
1
From the
PREFERENCES
menu, select
Media Renderer Setup
and press
�
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Panel Lock
Teletext Language
Off
Auto
4
Off
Display Settings
2
Press
s
or
r
to select
Installation
, and
press
�
3
Press
v
or
w
to select
On
, and press
�
Summary of Contents for 42XL700E
Page 56: ......
