Toshiba 42XL700E, Owner'S Manual

Page: 28 / 56

28
Using the TV’s features
Notes:
• Default setting is all
On.
• A warning message will appear 1 minute before
turning off.
Resetting the TV
Reset TV
will reset all TV settings, including
stored channels, to their original factory values�
1
From the
SETUP
menu, press s or r to
select
Reset TV
�
Auto Tuning
Location
Quick Setup
Software Licences
Manual Tuning
System Information
Reset TV
Home
SETUP
Menu Language English
2
Press to select�
A screen will appear warning that all settings
will be lost� Select
Yes
, and then press to
continue�
When the set powers back on, the first time
screen will appear (
-
page 13)� Press
to continue, and proceed to the
Auto Tuning
menu (
-
page 16)�
Viewing the Software Licences
The licences for the software used in this TV are
available for viewing on screen�
1
From the
SETUP
menu, press s or r to
select
Software Licences
�
2
Press �
A screen will appear displaying all of the
licencing information required for the TV’s
software�
Confirming software version
1
From the SETUP menu, press s or r to
select
System Information
�
2
Press to display the software version�
System Information
TOSHIBA
2010
16.1.x.x. Xxx xx 2010 - xx.xx.xx FW:xx
Note:
The software version displayed is just for the
illustration.
Selecting the video input source to view
1
Press on the remote control until
the video input mode list appears on the
screen, then press s , r or to select
appropriate input source (or press
o
on the
TV right side panel to select required input
source directly)�
TV
Inputs
1
2
3
4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
2
Press �
o
1 (
o
(1), video 1 input) or
o
1S (S-video
input),
o
2 (
o
(2), video 2 input),
o
3 (
o
(3), component video input),
o
4 (
o
(4), component video input),
HDMI1, HDMI2, HDMI3, HDMI4 (HDMI
input),
PC (
o
RGB/PC, PC input)
Notes:
• When the component video input, PC input
mode or HDMI input mode is selected, the
MONITOR OUT output terminals (
-
page 34)
output audio signal only.
• If a REGZA-LINK device is connected to an
HDMI input, the REGZA-LINK icon will appear.
• When the TV is switched on, it will take a few
minutes for the REGZA-LINK icon to appear in
the list; when an HDMI cable is removed, it will
take a few minutes for the icon to disappear.
• If the HDMI cable from connected device is
changed or HDMI device setting are changed,
Enable REGZA-LINK in the REGZA-LINK
Setup menu may need to be reset to On.