Toro Multi Pro WM, Operator'S Manual

Page: 28 / 96

g033559
Figure 27
1. T-bolt 3. Positive battery cable
(machine)
2. Nut 4. Negative battery cable
(machine)
2. Remove the cover (narrow) from the positive
battery cable (
Figure 28 ).
Note:
You no longer need the narrow battery
cover.
g033568
Figure 28
1. Cover–narrow (battery
terminal—red) 3. Cover–wide (battery
terminal—red)
2. Positive battery cable
(machine)
3. Install the wide battery cover over the positive
battery cable as shown in
Figure 28 .
Note:
Slide the cover far enough over the
cables to allow access to the post clamp.
4. Align the ring terminal of the fusible link (sprayer
wire harness) though the wide battery cover as
shown in
Figure 29 .
28