g214240
Figure 93
Mesh size—application rate
1.
Higher application rate
3.
Screen mesh size
2.
Lower application rate
Selecting a Nozzle-Tip Filter
(Optional)
Note:
The use the optional nozzle-tip filter to protect
the spray-nozzle tip and increase its service life.
Use the nozzle-tip filter table to identify the screen
mesh for the spray nozzles you are using based
on chemicals products or solutions with a viscosity
equivalent to water.
Nozzle-Tip Filter Table
Spray Nozzle
Color Code (flow
rate)
Filter Mesh Size*
Filter Color Code
Yellow (0.2 gpm)
100
Green
Red (0.4 gpm)
50
Blue
Brown (0.5 gpm)
50
Blue
Gray (0.6 gpm)
50
Blue
White (0.8 gpm)
50
Blue
Blue (1.0 gpm)
50
Blue
Green (1.5 gpm)
50
Blue
*The mesh size of the nozzle filters in this table
are based on spray chemicals or solutions with the
viscosity equivalent to water.
Important:
When you spray with higher viscosity
(thicker) chemical products or solutions with
wettable powders, you may need to use a coarser
screen mesh for the optional tip-filter; refer to
.
g214246
Figure 94
Mesh size—chemical or solution viscosity
1.
Higher-viscosity chemicals
or solutions
3.
Screen mesh size
2.
Lower-viscosity chemicals
or solutions
When you spray at a higher application rate, consider
using an courser tip-filter mesh; refer to
g214245
Figure 95
Mesh size—application rate
1.
Higher application rate
3.
Screen mesh size
2.
Lower application rate
66
Summary of Contents for Multi Pro WM
Page 91: ...Schematics g209531 Flow Diagram Sprayer System Rev B 91...
Page 92: ...Notes...
Page 93: ...Notes...
Page 94: ...Notes...
