Toro Multi Pro WM, Operator'S Manual

Page: 77 / 96

Removing the Rate Control
Manifold Valve
1. Remove 2 flange clamps and 2 gaskets that
secure the manifold for the rate control valve
(
Figure 110 ) to the pressure filter and agitation
valve.
Note:
Retain the flange clamps and gaskets
for installation in Installing the Rate Control
Manifold Valve (page 83) .
g033584
Figure 110
1. Flange (pressure filter
head)
4. Flange clamp
2. Manifold (rate control
valve) 5. Gasket
3. Flange (agitation valve) 6. 3-pin connector (valve
actuator—rate control
valve)
2. Remove the retainer that secure the outlet fitting
to the manifold coupling for the rate control valve
(
Figure 111 ).
g033585
Figure 111
1. Flange-head bolt (1/4 x
3/4 inch) 4. Retainer
2. Valve mount 5. Socket (outlet fitting)
3. Flange locknut (1/4 inch) 6. Coupling (manifold—rate
control valve)
3. Remove the 2 flange-head bolts (1/4 x 3/4 inch)
and 2 flange locknuts (1/4 inch) that secure
the rate control valve to the valve mount and
remove the valve manifold from the machine
(
Figure 111 ).
Note:
If necessary, loosen the mounting
hardware for the pressure filter head to ease
removal of the rate control valve.
Note:
Retain the flange-head bolts, flange
locknuts, and retainer for installation in Installing
the Rate Control Manifold Valve (page 83) .
77