Toro Multi Pro WM, Operator'S Manual

Page: 84 / 96

2. Assemble the agitation bypass valve, gasket,
and agitation-valve manifold with a flange clamp
and tighten by hand (
Figure 125 ).
3. Align a gasket between the flanges of the rate
control valve and the agitation-valve manifold
(
Figure 125 A).
g033605
Figure 125
1. Flange (rate control valve) 5. Coupling (manifold-valve)
2. Flange (master-boom
valve) 6. Socket (outlet fitting)
3. Flange clamp 7. Retainer
4. Gasket
4. Assemble the rate control valve, gasket, and
agitation-valve manifold with a flange clamp and
tighten by hand (
Figure 125 A)
5. Align a gasket between the flanges of the
agitation-valve manifold and the master-boom
valve (
Figure 125 A)
6. Assemble the agitation-valve manifold, gasket,
and master-boom valve with a flange clamp and
tighten by hand (
Figure 125 A)
7. Assemble the outlet fitting onto the coupling
fitting at the at the bottom of the manifold for the
agitation valve (
Figure 125 B)
8. Secure the outlet fitting to the coupling fitting by
inserting a retainer into the socket of the outlet
fitting (
Figure 125 B)
9. Assemble the agitation valve to the valve mount
with the flanged-head bolt and flanged locknut
(
Figure 124 ) that you removed in step 3 of
Removing the Agitation Manifold Valve (page
78)
and torque the nut and bolt to 10 to 12 N∙m
(90 to 110 in-lb).
10. If you loosened the mounting hardware for the
master-boom valve, tighten the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
Installing the Master Boom
Manifold Valve
1. Align the flange of the master-boom-valve
manifold, a gasket, and the flange of the
master-boom bypass valve (
Figure 126 ).
g033590
Figure 126
1. Flange (agitation valve) 4. Flange clamp
2. Flange
(bypass—master-boom
valve) 5. Gasket
3. Manifold (master-boom
valve) 6. 3-pin connector (valve
actuator—master-boom
valve)
2. Assemble the master-boom valve manifold,
gasket, and master-boom bypass valve with a
flange clamp tightened hand tight (
Figure 126 ).
3. Align the flange of the master-boom-valve
manifold, a gasket, and the agitation-valve
manifold (
Figure 126 ).
4. Assemble the master-boom-valve manifold,
gasket, and agitation-valve manifold with a
flange clamp and tighten by hand (
Figure 126 )
5. Align the socket of the 90° outlet fitting onto
the coupling fitting at the at the bottom of the
manifold for the master-boom valve (
Figure
127 ).
84