Toro Multi Pro WM, Operator'S Manual

Page: 48 / 96

Icon Descriptions (cont'd.)
Save value
Exit menu
Hour meter
Correct PIN code entered
Check PIN entry/Calibration
verification
Master boom On/Boom
sprayer Off
Master boom On/Boom
sprayer On
Full spray tank
Spray tank at half
Tank level low
Empty spray tank
or
TURF units (1,000 square
feet)
Area sprayed
Volume sprayed
Adjust tank volume
Home screen
Clear active area
Clear all areas
Adjust digit
Icon Descriptions (cont'd.)
Select the next area for
accumulation
Application rate 1
Application rate 2
Boost rate
Using the Menus
Access the calibration settings in the InfoCenter menu
system by pressing the menu access button while at
the main screen. This returns you to the main menu.
Refer to the following tables for a summary of the
options available from the menus:
Calibration
Menu Item Description
Test Speed This menu sets the test speed for calibration.
Flow
Calibration
This menu calibrates the flow meter.
Speed
Calibration This menu calibrates the speed sensor.
Selecting the Sprayer
Programming
HDX-Auto Model
Switching between Manual Mode and
Automatic Mode
g028518
Figure 65
1. Automatic mode (switch
position) 2. Manual mode (switch
position)
•
At the control console, press the sprayer-mode
switch to the left position to control the application
48