Toro Multi Pro 41394, Operator'S Manual

Page: 61 / 96

5. Rotate the nut for the fuel pump/sending unit
counterclockwise and remove the nut and seal
(
Figure 79 )
6. Carefully lift and rotate the fuel pump/sending
unit out of the neck of the fuel tank (
Figure 80 ).
Important:
Use caution when handling the
fuel pump/sending unit to avoid damaging
the arm for the float of the sending unit.
g032543
Figure 80
1. Fuel-tank neck 4. Fuel pump/sending unit
2. Arm (sending-unit float) 5. Filter
3. Pickup tube (fuel filter) 6. Float
Replacing the Fuel Filter
1. Remove the pickup tube of the fuel filter from
the fitting of the fuel pump (
Figure 81 ).
Note:
Discard the fuel filter.
g028351
Figure 81
1. Fitting (fuel pump) 4. Float arm (empty position)
2. Float arm (full position) 5. Fuel filter (short leg)
3. Pickup tube
6. Fuel filter (long leg)
2. Align the pickup tube of the new fuel filter with
the fitting of the fuel pump (
Figure 81 ).
3. Align the long leg of the fuel filter with float when
the float arm is in the empty position (
Figure 81 ).
4. Insert the fuel-pump fitting into the pickup tube
until the fitting is fully seated (
Figure 81 ).
61