Toro Multi Pro 41394, Operator'S Manual

Page: 55 / 96

9. Repeat steps 2 through 8 to the actuator-rod
bearing at the other side of the machine.
Engine Maintenance
Engine Safety
Shut off the engine before checking the oil or adding
oil to the crankcase.
Checking the Air Cleaner
Service Interval: Before each use or daily Service
the air cleaner more frequently if
operating conditions are extremely
dusty or sandy.
1. Engage the parking brake, shut off the spray
pump, shut off the engine, and remove the key.
2. Tilt the passenger seat forward and align the
prop rod into the detent in the prop-rod-guide
slot.
3. Clean the dust cap and air-cleaner body ( Figure
73 ).
g028188
Figure 73
1. Dust cap 4. Air-cleaner body
2. Latch (dust cap) 5. Dust valve
3. Air-filter element
4. Check the air-cleaner body for damage that
could cause an air leak (
Figure 73 ).
Note:
Replace the dust cap and air-cleaner
body if either is damaged.
5. Squeeze the dust valve to clear it of dirt, dust,
and debris (
Figure 73 ).
6. Loosen the 2 latches that secure the dust cap
to the air-cleaner body.
55