Installing the Forward Heat Shield
1.
Align the rear flange of the forward heat shield
over the forward flange of the rear heat shield
(
).
g028177
Figure 63
1.
Front of the machine
3.
Rear flange (forward heat
shield)
2.
Hex-head bolts and
washers
4.
Forward flange (rear heat
shield)
2.
Align the holes in the forward heat shield with
the threaded holes in the chassis (
3.
Assemble the forward heat shield to the machine
with the 6 hex-head bolts and 6 washers (
) that you removed in step
of
Forward Heat Shield (page 50)
.
4.
Torque the bolts to 1978 to 2542 N∙cm (175 to
115 in-lb).
5.
Remove the jack stands and lower the machine.
Removing the Undercarriage
Shroud
1.
Remove the 5 flange-head bolts (5/16 x 7/8
inch) and 5 washers (5/16 inch) that secure the
rear of the undercarriage shroud to the chassis
of the machine (
Note:
Retain the flange-head bolts and
washers for installation in step
of
Undercarriage Shroud (page 52)
.
g189584
g189585
Figure 64
1.
Flange-head bolts (5/16 x
7/8 inch)
3.
Washers (5/16 inch)
2.
Undercarriage shroud
4.
Front of the machine
2.
Remove the 4 flange locknuts (5/16 inch) from
the bolts and carriage bolt that secure the
mounting tabs of the undercarriage shroud
to the engine-mount brackets of the machine
(
).
Note:
Do not remove the bolts from
the machine. Retain the flange locknuts
for installation in step
of
Undercarriage Shroud (page 52)
.
51
